The fans themselves are very quiet and nice quality. It came with plenty of screws and even screw plugs to cover any holes!
When I save enough to build a better cabinet for my equipment I will most likely order my cooling stuff from these guys.
Also, other reviews said that the holes didn't line up right, however as of my order they line up just fine so maybe they fixed that. :)I got this to help my PS3 cool itself in my enclosed entertainment cabinet. Without it, the PS3 sounded like a jet engine trying to cool itself, even with the doors on the cabinet open. I installed this fan in the back of the cabinet and plugged it into the PS3. Now, whenever the PS3 is on, the fans run and stays nice and cool. The fans on the PS3 even seem to run quieter now that this is helping to pull the hot air away from the system. Definitely worth the investment and slight hassle of installation.
Buy Coolerguys Dual 80mm USB Powered Cabinet Cooler for Cabinet & Home Theaters Now
I purchased this to go in the cabinet at church that houses our computer for our big screen. The cabinet was always warm inside. Once I installed this, it is not as warm anymore.Assembly was easy, just make sure to have the fans point the correct way before you install this. It will save you having to take it back out and re-install it.
What I like about this is that it runs on the USB from the computer, so when the computer is off, this is off, and likewise when the computer is on, this is on. I don't have to worry about someone forgetting to start or stop it.New desk required CPU enclosed which created excessive heat. This Powered Cooler solved the problem. Trapped heat is no longer an issue. Easy to install and powered by USB is a plus.
Want Coolerguys Dual 80mm USB Powered Cabinet Cooler for Cabinet & Home Theaters Discount?
It's a bit noisier than I'd like kind of rattles I can hear it when nothing else is on and I had it plugged into my XBox360, which the USB port on it runs all the time.I fixed that by getting a USB extension cable, and plugging it into my reciever (Sony STR-1020, recently purchased from Amazon), since it powers the USB port only when turned on....I don't hear it now.
Seems to move enough air to get the job done, though I've yet to play my XBox since installing it simply due to a lack of free time, so I can't say that it'll do the trick with absolute confidence, but I'm very certain that it will.
I installed this into a TechCraft XLN62 TV Stand/Console/Cabinet that I'd recently purchased even though it's well designed and has vents through the bottom, back and shelves, the air doesn't move well as the heat rises and stops against the top, and has no where to go...it would get pretty hot in there hotter than I'd like. I had to trim the back panel to make it fit (thanks Dremel!) and then reinstall the fans so they blow out instead of in, install the finger guards, and screw it to the back panel/cabinet. Looks like it belongs there, so I'm happy with my ability to install it ;)
Short of that, it's a pretty straight forward, and it should do the trick. I think it was worth the money...
No comments:
Post a Comment